This disconnection module is designed for setting up unshielded distribution fields for 4 wire and 8 wire cables. Compatible with Category 5(e) in accordance with EN 50173/ISO 11801. Back mount frame is 2/10 and DIN rails with white colour housing...more

10 pair module has four wire test access and contain two piece contacts normally closed. Available in ABS and PBT housing materials....more

Wiring up to 20 pairs depending on the application. Overall diameter of the single wires can range from 0.7mm to 1.6mm. For clicking onto back mount frame is 2/10, 2/8 and 2/5 with red colour housing material....more

Wiring up to 38 drain wires to an earth contact without soldering. For clicking onto back mount frame is 2/10, 2/8 and 2/5 with red colour housing material....more

There are earth contacts at both ends of the module for connecting earth and special application wires. This module with a fixing dimension of 170mm and two screws are used to mount module with grey colour housing....more

The module with one-way safety feature increasing the mounting pitch of 17mm. High density module with pitch of 12mm for installation in 75mm profile rack system. After installation the side with the cable leads is covered....more

The magazines are designed for the complete equipped for connection or disconnection modules. Compatible with overvoltage protection in analogue telecommunication systems. The overvoltage arrestors and the fail-safe elements can be replaces to new...more

3 pole overvoltage arrestor (metallic/ceramic) filled with noble-gas and optional fail-safe, type 8x13. Reliable limitation of over voltages and diversion of high currents....more

Back mount frames consist of U-shaped stainless steel sheet provides high degree of stability and full corrosion resistance. Based on requirement, back mount frames can be used to fix various number of modules....more

This mounting frame used in 19” cabinet for 10 pair modules. Manufactured in stainless steel and with cable manager....more

This label holder can be directly mounted on the front of the connection or disconnection module. Paper label and transparent cover included....more

Identification of the modules and supplied with 1 set with one piece each type....more

This tool supplied with sensor and without sensor. Supplied in a single pack each....more

This Eurostyle BT module available as Master, PBX Master or secondary. This module compatible with Eurostyle faceplates. The termination for this module through 238A IDC connectors. Manufactured in high quality ABS material....more

RJ11 Keystone jacks from Norden are used in wall plates and surface boxes and fully support all voice network application. This high quality RJ11 jacks meets TIA/EIA-568A and TIA/EIA-568B category 3 requirements. Dual type Termination block accept...more

This Eurostyle RJ II module has a fully shuttered aperture and compatible with Eurostyle faceplates.The termination for this module through 238A IDC connectors. Manufactured in high quality ABS material....more

Norden Line Jack series can be either surface or flush mounted. Termination is 3 way BT 238A IDC connectors or screw terminals. White high gloss ABS material used for the housing materials. Wide range of line jacks available....more

The box is made of polystyrene, a self-extinguishing plastic which provides corrosion free, highly impact resistance, stable and maintenance free use. All installation parts, such as cable entries, cable fixing rings and wire guide rings are molde...more

The wall mounted distribution cabinets are designed for easy installation. The metal bars can accommodate either connection or disconnection modules. The Cable glands in various sizes and numbers for cable feed in through floor and roof rubber hol...more

This 100 pair outdoor distribution box designed for wall and wall mounting. Applicable for connection and disconnection module  
Construction : ABS housing material.  
Mountin...more

Norden Distribution Frame designed and manufactured for easy installation. The assembled frames can be transported and installed by one person.
Features
Two distribution F...more

This closure designed for the application for indoor as well as outdoor. Available in various sizes from 50 pair up to 600 pair. Easy installation is the main attraction for this product....more

Norden voice patch panel available two sizes either 25 port or 50 port. The product designed for voice application and ideal way to integrate PBX or other voice circuit in to a standard structured cabling system. Expansive cable management...more