Accell Category 6 Shielded keystone Jacks are shielded with a two part case giving optimum protection from electromagnetic interference from an outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment. 180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of Face plates and unloaded shuttered modules and backward compatible with category 5E/class D system components.
Accell Category 6 Shielded keystone Jacks are shielded with a two part case giving optimum protection from electromagnetic interference from an
outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are
designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications
and are available in a 180° orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment. 180° orientation provides
perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation.
The jack is manufactured with an integral cable strain relief. They can be installed into a number of Face plates and unloaded shuttered modules and
backward compatible with category 5E/class D system components.
| Colour | Silver (metal) |
| Size | 26.2x17x35.1 mm |
| Angle | 180 Degree |
| Temperature | -40°C to +70°C (Storage), -10 C to +65 C (Operation) |
| Housing Material | Zinc Alloy |
| IDC Type | Dual (110 Or Kronel) Type |
| IDC Wire Gauge | 22-26 AWG, Solid or Standard |
| Colour Coding | As Per 568 A/B Standard |
| Overall Shield | Fully Shielded Corrosion-Resistant Die-Cast Zinc-Alloy Casing |
| Spring Wire | Phosphor Bronze Alloy |
| IDC | Phosphor Bronze Alloy |
| Conductor Termination | >30 |
| Insulation Diameter | 0.7-1.6 mm |
| Flammability Rating | UL 94 V-0 |
| Safety Rating | UL 1863 |
| Current Rating | 1.5 A |
| Insulation Resistance | 500 MΩ min 100 V dc |
| Voltage Rating | 230 V rms max. |
| Dielectric Voltage | 1000 V DC or AC, 60 Hz for 1 min (Contact-Contact) |
| Plug/Jack contact resistance | 20 mΩ per contact |
| IDC Contact resistance | <1 mΩ max |
| Insertion/Extraction Life | 750 Cycles minimum |
| Retention | 133 N |
| Propagation delay | 2.5 ns max./1-250MHz |
| Propagation delay Skew | 1.25 ns max./1-250MHz |
| Coupling Attenuation | 35 dB @ 30-250 MHz |
| Part Number | Description |
| AKJ222180X | Cat 6 Shielded Keystone Jack Tool Less 180D |
