CATEGORY 6 U/FTP PATCH CORD

Norden Category 6 U/FTP patch cords are manufactured using high-quality U/FTP four-pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high-performance Norden Category 6 connectivity (solid U/FTP cable, patch panels, and work area outlets) , provides superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible with Category 5e (Class D) products. Each patch cord is tested with a Fluke tester and individual covers include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.

Norden Category 6 U/FTP patch cords are manufactured using high-quality U/FTP four-pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high-performance Norden Category 6 connectivity (solid U/FTP cable, patch panels, and work area outlets) , provides superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx)applications support. This is fully backward compatible with Category 5e (Class D) products. Each patch cord is tested with a Fluke tester and individual covers include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.

COMPLIANCE


  • IEEE 802.af and IEEE 802.3at for PoE applications
  • ANSI/TIA-568-C.2 and ISO/IEC-11801 (2nd  Edition)
  • IEC 61156-2, EN 50173; ENC 50288-6-2 Category 6 standard


DESIGN & MATERIALS


Basic Cable Conductor

Stranded Bare Annealed Copper

Wire Insulation

SFS PE

Number Of Insulated Conductors

≥125%

Colour Code Of Pairs

Blue x White, Orange x White, Green x White, Brown x White

Individual Pair Shield

Aluminium/Polyester 

Shield Coverage


Drain Wire

Stranded Tinned Copper

Outer Jacket and Boots

LSZH or PVC

Jacket and Boot Colour

Per Requirement

Standard Surface Marking 

Includes Norden P/N, and cable description

Cable Outer Diameter

6.0 ± 0.2 mm

Bend Radius

60mm

Operating Temperature

-10°C to +60°C

Storage Temperature

-10°C to +40°C

Flame Test

FT4

Wire Scheme

T568B


ELECTRICAL DATA


Characteristics Impedance 

100 ±6 Ohm @ 1-250MHz

Conductor Resistance

≤5Ω

Contact Resistance

20 m ohms max.

 Resistance Unbalance

2% max

Mutual Capacitance

5.6 nF/100m

Voltage Rating

75 V ac max.

Dielectric Strength

1000 volts/1-minutes rms

Ampacity

1.0 Amps max.

Coupling Attenuation

40dB min @30-100MHz 40-120log (f/100)@100-250 MHz

Insulation Resistance

≥10 MΩ

Pair To Ground Capacitance Unbalance

3.3 nF/Km nom.


MECHANICAL & TRANSMISSION DATA


Cable to plug tensile strength

90 N min

Pulling force

10 N max.

Durability

≥1200 mating Cycles

Propagation Delay 1-250 MHz

25 ns/100m


TRANSMISSION PERFORMANCE DATA


Freq.
MHz
RL(dB) min.
2m cord5m cord10m cord
168.068.065.020.0
465.065.065.021.8
1064.864.262.822.5
2060.958.657.223.4
3056.254.953.623.0
6050.449.248.120.0
10046.445.344.418.0
12544.543.542.717.0
15043.242.241.116.2
20040.839.639.115.0
25038.837.937.613.8


Part Number DescriptionLength
127-31301X
Category 6 U/FTP Patch Cord PVC 01m1m
127-31302XCategory 6 U/FTP Patch Cord PVC 02m
2m
127-31303XCategory 6 U/FTP Patch Cord PVC 03m
3m
127-31305XCategory 6 U/FTP Patch Cord PVC 05m
5m
127-32301XCategory 6 U/FTP Patch Cord LSZH 01m
1m 
127-32302XCategory 6 U/FTP Patch Cord LSZH 02m
2m
127-32303XCategory 6 U/FTP Patch Cord LSZH 03m
3m
127-32305XCategory 6 U/FTP Patch Cord LSZH 05m
5m

X: BK(Black), BL(Blue), GN(Green), GY(Gray), RD(Red), WH(White), YL(Yellow)