CATEGORY 6A U/FTP PATCH CORD E-SERIES

CATEGORY 6A U/FTP PATCH CORD E-SERIES

Norden augmented U/FTP patch cord delivers optimal transmission & networking performance with reduced Insertion loss and Alien crosstalk. This is fully backward compatible to Category 6 (Class E) and Category 5e (Class D) products and maximizes productivity levels 10 times the data throughput of Category 6. Each patch cord is tested with Fluke tester and individual cover include with the report. This Patch cord is tested for transmission frequencies up to 500 MHz and compatible with the 10 Gigabits applications, including the following protocols: Gigabit 1000BASE-T; 100BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice.

Norden augmented U/FTP patch cord delivers optimal transmission & networking performance with reduced Insertion loss and Alien crosstalk. This is fully backward compatible to Category 6 (Class E) and Category 5e (Class D) products and maximizes productivity levels 10 times the data throughput of Category 6. Each patch cord is tested with Fluke tester and individual cover include with the report. This Patch cord is tested for transmission frequencies up to 500 MHz and compatible with the 10 Gigabits applications, including the following protocols: Gigabit 1000BASE-T; 100BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice.

COMPLIANCE

IEEE 802.af and IEEE 802.3at for PoE applications
IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
IEC 60603-7, ISO/IEC-11801
ANSI/TIA-968-A,ANSI/TIA-568-C.2 Category 6A

DESIGN & MATERIALS

Basic Cable Conductor

Stranded Bare Annealed Copper

Wire Insulation

SFS PE

Number Of Insulated Conductors

8

Colour Code Of Pairs

Blue x White, Orange x White, Green x White, Brown x White

Individual Pair Shield

Aluminium Foil

Overall Shield

Nil

Drain Wire

Yes

Outer Jacket and Boots

LSZH or PVC

Jacket and Boot Colour

Per requirement

Cable O.D.

6.0 ± 0.2 mm

Bend Radius

25 mm without load

Storage Temperature

-20°C to +80°C

Temperature Operating Range

-20°C to +75°C

Flame Test

IEC 60332-1 (LSZH)

Wire Scheme

T568B

ELECTRICAL DATA

Impedance @ 1-250 MHz

100 ±15 Ω

Impedance @ 250-500 MHz

100 ±18 Ω

Conductor Resistance

73 Ω/km

Contact Resistance

20 MΩ max.

Resistance Unbalance

2 % max.

Voltage Rating

72 V DC

Dielectric Strength

1 KV/min. rms

Ampacity

1.0 Amps max.

Insulation Resistance

150 MΩ/Km

Transfer Impedance

N/A

Pair To Ground Capacitance Unbalance

3.3 nF/Km nom.

MECHANICAL & TRANSMISSION DATA

Cable to plug tensile strength

96 N min.

Pulling force

10 N Max.

Durability

1000 Mating Cycles

Propagation Delay 1-250 MHz

25 ns/100m

MECHANICAL & TRANSMISSION DATA

Freq.
MHz
NEXT(dB) min.RL(dB) min.
1m cord2m cord5m cord10m cord
165.065.065.065.019.5
465.065.565.065.522.0
1065.064.964.462.923.0
2061.060.859.258.623.5
3056.956.354.953.622.8
6051.050.449.248.120.0
10047.046.445.444.518.0
20041.140.739.939.315.0
25039.338.938.137.714.0
30036.436.235.935.812.8
40031.831.932.132.510.9
50028.128.329.329.69.5
Part NumberDescriptionLength

127-K1301X

Category 6a U/FTP Patch Cord E Series PVC 01m

1m

127-K1302X

Category 6a U/FTP Patch Cord E Series PVC 02m

2m

127-K1303X

Category 6a U/FTP Patch Cord E Series PVC 03m

3m

127-K1305X

Category 6a U/FTP Patch Cord E Series PVC 05m

5m

127-K1310X

Category 6a U/FTP Patch Cord E Series PVC 10m

10m

127-K2301X

Category 6a U/FTP Patch Cord E Series LSZH 01m

1m

127-K2302X

Category 6a U/FTP Patch Cord E Series LSZH 02m

2m

127-K2303X

Category 6a U/FTP Patch Cord E Series LSZH 03m

3m

127-K2305X

Category 6a U/FTP Patch Cord E Series LSZH 05m

5m

127-K2310X

Category 6a U/FTP Patch Cord E Series LSZH 10m

10m

X: BK(Black), BL(Blue), GN(Green), GY(Gray), RD(Red), WH(White), YL(Yellow)