Norden Cat 6 S/FTP patch cords with M12 X coded connectors are manufactured using high quality shielded four pair Category 6 stranded cable. This patch cord when used with high performance Norden Category 6 connectivity, provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base- Tx) applications support. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz. Patch cord cable has PUR jacket material for industrial applications.
Norden Cat 6 S/FTP patch cords with M12 X coded connectors are manufactured using high quality shielded four pair Category 6 stranded cable. This patch cord when used with high performance Norden Category 6 connectivity, provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base- Tx) applications support. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz. Patch cord cable has PUR jacket material for industrial applications.
Sensor, actuator, encoder, servo motors Factory automation and process control
Packaging, labelling and logistic devices Industrial instrumentation
Commercial electronics PCBA
Industrial safety light curtain, light grid, switches
Power supply
Fieldbus: DeviceNet, CANopen, Profibus, Ethernet, NMEA 2000
LED display panel & outdoor LED lighting
|
Basic Cable Conductor |
Stranded Bare Annealed Copper |
|
Conductor Size |
26 AWG |
|
Wire Insulation |
PE |
|
Number Of Insulated Conductors |
8 |
|
Colour Code Of Pairs |
Blue x White, Orange x White, Green x White, Brown x White |
|
Individual Pair Shield |
Aluminium Mylar foil |
|
Overall Shield |
Tinned Copper, Braid |
|
Drain Wire |
No |
|
Outer Jacket and Boots |
PUR (Polyurethane) |
|
Jacket and Boot Colour |
Per Requirement |
|
Standard Surface Marking |
Includes Norden P/N, cable description |
|
Cable O.D. |
6.4 ± 0.5mm |
|
Bend Radius |
> 23 mm Without load |
|
Storage Temperature |
-20°C to +80°C |
|
Temperature Operating Range |
-20°C to +75°C |
|
Impedance |
100Ω ±15% |
|
Dielectric Strength of Insulation |
2500Vdc/2seconds |
|
Insulation Resistance |
500 MΩ/Km |
|
Conductor Resistance |
14.0Ω/100m@20°C |
|
Resistance Unbalance |
2 % max. |
|
Capacitance Unbalance |
160pF/100m |
|
Mutual Capacitance |
5600pF/100m |
|
Cable To Plug Tensile Strength |
96 N min. |
|
Pulling Force |
10 N max. |
|
Durability |
1000 Mating Cycles |
|
Propagation Delay 1-250MHz |
< 25 ns/100m |
|
IP Rating |
IP 67 |
| Part Number | Description | Length |
|
RJ 45 connector at one end and M12 X-coded connector at other end |
||
|
127-V4510X |
M12 X 8 Pin Male to RJ45 Plug CAT 6 S/FTP Patch Cord PUR Jacket |
10m |
|
127-V4516X |
M12 X 8 Pin Male to RJ45 Plug CAT 6 S/FTP Patch Cord PUR Jacket |
16m |
|
127-V4522X |
M12 X 8 Pin Male to RJ45 Plug CAT 6 S/FTP Patch Cord PUR Jacket |
22m |
|
127-V4530X |
M12 X 8 Pin Male to RJ45 Plug CAT 6 S/FTP Patch Cord PUR Jacket |
30m |
|
M12 X-coded connector at both the end |
||
|
127-W4510X |
M12 X 8 Pin Male CAT 6 S/FTP Patch Cord PUR Jacket |
10m |
|
127-W4516X |
M12 X 8 Pin Male CAT 6 S/FTP Patch Cord PUR Jacket |
16m |
|
127-W4522X |
M12 X 8 Pin Male CAT 6 S/FTP Patch Cord PUR Jacket |
22m |
|
127-W4530X |
M12 X 8 Pin Male CAT 6 S/FTP Patch Cord PUR Jacket |
30m |
