Online Transformerless Rack Mount 10kVA UPS Manufacturer & Supplier in Globe

Maxpower RM Series is a small to medium power transformer-less UPS of CellNor. This is an Online double conversion UPS with PFC technology and Full digital control (DSP). It has an Output power factor of 0.9.The CN7010MP-RM model support economic (ECO) operation mode

GENERAL FEATURES

High power density
Rack/Tower convertible design
N+X parallel redundancy support maximum 4 unit in parallel
Online double conversion with full digital control
Wide input voltage range:110~286Vac
Wide input frequency range
Generator compatible
ECO mode operation for energy saving
Self-testing when UPS start-up
Maximum charging current up to 10A
Cold start
Intelligent fan speed regulation

Model			CN7010MP-RM
Capacity	VA		10000
	Watts		9000
Input	Normal Voltage		220/230/240Vac(L+N+PE)
	Operating Voltage Range		110~286Vac
	Operating Frequency Range		40~70Hz (50/60Hz Auto-Sensing)
	Power Factor		≥0.99
	Bypass voltage range		Max. voltage: 220V: +25%(optional +10%,+15%,+20% ) 230V: +20% (optional +10%, +15%) 240V: +15% (optional +10%) Min. voltage: -45% (optional -20%, -30%)
	Bypass Freq Range		Frequency protection range:±10%
	ECO range		Same as the bypass
	Harmonic distortion (THDi)		≤5%(100% linear load)
	Generator Input		Support
Output	Output Voltage		220/230/240Vac
	Power Factor		0.9
	Voltage Regulation		±1%
	Frequency Line mode		±1%/±2%/±4%/±5%/±10% of the rated frequency(optional
	Frequency Bat mode		50/60(±0.1)Hz
	Crest factor		3:1
	Harmonic Distortion (THDv)		≤2% with linear load, ≤5% with non-linear load
	Efficiency		>94%
Battery	Internal	Battery Voltage	192/216/240Vdc (Adjustable)
		Backup time	Long run unit depends on the capacity of external batteries Estimated remaining time displayed on the LCD
		Typical Recharging Time	6~8 hours (to 90% of full capacity
		Charging current	Maximum current 10A; charging current can be set according to battery capacity installed
System Features	Transfer time		Mains to battery:0ms; Mains to bypass:0ms
	Overload Line Mode		Load≤110%:60min; ≤125%:last 10min; ≤150%:last 1min;>150% turn to bypass mode
	Overload Bypass Mode		63A(Input breaker)
	Short circuit		Hold whole system
	Overheat		Line mode: Turn to bypass; Backup mode: shut down UPS immediately
	Battery Low		Alarm and switch off
	Self-diagnostics		Upon power on and software control
	Battery		Advanced battery management
	Audible & Visual alarms		Line failure, Battery under voltage, Overload, System fault
	LED & LCD display		Line mode, Bat. mode, Eco mode, Bypass mode, Battery under voltage, Overload & UPS Fault
	LCD Display		Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage, Inner temperature & Remaining battery backup time
	Communication interface		RS232,USB,SNMP card(optional), Relay card (optional)
Environment	Operating temperature		0~40°C
	Storage temperature		-25~55°C
	Humidity Range		0~95% (Non-condensing
	Altitude		<1500m
	Noise Level		58dB at 1 Meter
Physical	Dimension W x D x H (mm)		440 x 625 x 86.5 (2U)
	Weight (kg)		18
Standards	Safety		IEC/EN62040-1,IEC/EN62477-1
	EMC		IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8

EXTERNAL BATTERY PACK
Model	CNBC10120CR
Battery Type	VRLA (Lead acid maintenance free battery)
Typical battery recharging time	6~8 hours (to 90% of full capacity)
Typical Battery Life	3~5 years, depend on discharging cycle and ambient temperature
System Voltage	±120Vdc
Battery Qty	20 PCS
Capacity	7Ah/9Ah (12V)
PHYSICAL
Dimension W x D x H (mm)	440 x 680 x 131 (3U)
Net weight(kg)	58/63
Safety	CE
Operating environment	0°C~40°C
Relative humidity	0~95% (Non condensing)
Noise Level	<40dB at 1 Meter