Water Sensor

Water Sensor

The water logging sensor can provide an output signal.When the water logging is high enough to reach at the sensor probes (about 1mm above the test surface), it sends an alarm signal.

The water logging sensor can provide an output signal.When the water logging is high enough to reach at the sensor probes (about 1mm above the test surface), it sends an alarm signal.

Working voltage

12V DC, with polarity protection

Working current

<25mA

Cable length

Customizable (Max. 5m)

Working temperature

0°C~55°C

Relative humidity

10-90%

Water logging height

1mm above surface

Monitoring scope

0~100%

Response Speed

50ms

INSTALLATION

  • The water logging sensor should be laid vertically with the probes face down. Please choose the lower surface to lay it
  • If the customer wants to detect small water leakage rather than exceeding the limited height of water logging. Please lay a sponge under the sensor and sink the probes into it. Then an alarm will be immediately sent when the sponge soaks up water
  • Please connect the water logging sensor to the port of water on the front panel of devices
  • If the customer need change the length of cable, please contact us. The maximum length of customized cable can be 5 metres.
Part Number Height (U)

155-WS03X

Water Sensor